Place of Origin: | Zhejiang, China (Mainland) |
Add to My Favorites | |
HiSupplier Escrow |
IC And ID Card Traffic Tripod Turnstile Barrier Gate With Locked-Rotor Auto - Detection
Quick Detail:
Name: Turnstile barrier gate
Driving Motor: Brushless DC Motor
Power Supply: 220V±10%, 110V±10%
Transit Speed: 30~40 persons/min
Working Environment: Indoor , Outdoor
Rotating Direction: Double Direction
Specifications
Description | Parameter |
Power Supply Input | AC110/220V±10%, 50HZ 200W |
Working Voltage | 24V DC |
Power Consumption During Idle |
10W |
Power Consumption During Operation |
150W |
Passage Width | 600mm |
Response Time | 0.3 second |
Pass Speed | 25person per minute |
Housing/Arm | Stainless Steel |
Internal Mechanism | Mild Steel |
Arm Disc | Alloy Chromed |
Protection Level: | IP45 |
Working Temperature: | -30~50 |
Electro-magnetic drive: | 24V DC |
Thickness of Ply : | 1.5mm (Standard)?304# |
Polishing: | Brushed surface (Standard) / Polishing surface |
Weight: | About 42KG |
Size: | 420mm(L)×330mm(W)×980mm(H) |
Mechanical life: | Two million |
Arm Length: | 500mm |
Arm Diameter: | 38mm (Standard) |
Max Tolerance of Arm: | 60KG |
Diving Force of Arm: | 3KG |
Relative Humidity (RH): | 5%-90%(without concretion) |
Interface: | RS485 |
Control I/O: | ±12V electrical level signal or DC12V pulse signal of pulse width ≥ 100ms |
Features:
Mechanical drive unit with solenoid locking mechanism eliminate the use of expensive electric motor and reduce maintenance cost.
If arm rotated more than half, it will auto-rotate to the next idle position. If arm rotated less than half, it will auto-rotate back to the current idle position.
Built in adjustable tensioner to control rotation force to minimize over rotation. Arm just need to be pushed lightly to rotate therefore even elderly or children are able to use the turnstile.
Turnstile can be configured to be bi-directional or uni-directional. Housing is locked with special key to avoid tampering.
When power off, the arm will be dropped down (optional set free passage when power off) to the request of fire protection.
When power on, the arm can lift by hand.
Emergency configuration: the tripod will drop automatically by power off to provide a clear walkway for escape in the event of an emergency
Control panel with count and LED digital function. Traffic-light: A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing
It can be used for intelligent control and management of the passage after equipped with diffent access control system.
A valid lock action can allow one passage at one time. It will lock automatically if passage through turnstile is not completed within pre-set time, the set time(from 2-60 seconds, by default, it is 10 seconds) can be set up with the built-in small keyboard or software.
Self-recovery function: the machine will recovery automatically with invalid counting if passage is not completed within pre-set time (5 seconds default, adjustable by software)
Turnstile accessories:
Turnstile Mechanism (semi-auto)
Turnstile housing (304# Stainless steel at 1.5MM)
Turnstile Control Board
Turnstile Supply
Turnstile Traffic Indicator(double direction)
Turnstile Passage Status Lights
Communication with customers
1 - Does the turnstile come with a RS485 PC software?
The turnstile itself doesn’t come with a RS485 PC software,you need purchase the RS485 door access control and card reader.But we suggest you purchase TCP/IP door access control and card reader.Because it doesn’t need converter,and use internet cable it can directly communicate with a computer.Compare with RS485 door access control,It is more convenient and transfer speed much faster.
2- Can I communicate the turnstile direct with a PC?
No,you can’t communicate the turnstile directly with a pc,because the main board just out put low level signal,but pc can not receive low level signal,so the turnstile must connect a door access control then can connect with a pc.
3 - They come with the complete command manual (if we want to develop our own software)?
For normal passage control,we have compete command manual for you.,Many clients from different countries use our software,don’t need second develop.If your company has the ability to develop your own software, we can provide SDK to you.
4- can I use just one access control control 2 pcs turnstile?
You can use one one access control for double doors to control 2pcs turnstile,but the 2 turnstiles must be very close,because if the distant is far,first,it will not convenient to set up the cable,second the single will be less then can influence the whole facility.So,for 2 doors,we suggest you use 2 access control.
Alarm Detector Online Market [China (Mainland)]
Business Type:Manufacturer
City: Guangzhou
Province/State: Guangdong
Country/Region: China (Mainland)