Three Rollers Turnstile Barrier Gate Semi-automatic With Access Controller

Quick Detail:

Name: Turnstile barrier gate

Driving Motor: Brushless DC Motor

Power Supply: 220V±10%, 110V±10%

Transit Speed: 30~40 persons/min

Working Environment: Indoor , Outdoor

Rotating Direction: Double Direction

Specifications

1) It can be used for intelligent control and management of the passage after equipped with diffent access control system.Features:

2) Mechanical drive unit with solenoid locking mechanism eliminate the use of expensive electric motor and reduce maintenance cost.

1) The entire system runs smoothly, with a small noise and free of mechanical impact.

The system adopts the exclusive technique of. double cam. As a result, the turnstile is more accurate and reliable for zero point locking and unlocking.

3) DC Brushless Motor, Maintenance Free

4) It has failure self-detect and alarm indication function, facilitating maintenance and application

 for the users.

5) It is provided with multiple operation modes for selection. It can either read card in double way for flow limit, or reading card in a way while barring in the other, or read card in a way while free passage in the other. More over, the operation mode of turnstile may be set up with the built-in small keyboard.

6) It has automatic function of opening or closing when power off.

7)The equipment is provided with a unified, standard electric interface and is available to be integrated with various read/write facilities to facilitate the system integration. It is able to realize far end control and management with the help of administrative computer.

8)  Counting the passing people number automaticly, and with LED display

9)  Direction indicator function, showing passing or prohibiting for the people

10)  Prohibiting opposite direction passing, one side reading the card, the other side will lock when you passing forcely; the locking time can be setted, and unlocked by the card.

11) Prohibiting illegal passing, the turnstile without the card, the locking time can be setted, and unlocked by the card.

12) Anti-hit against function  when the turnstile touch the passing people, it will stop and after several 

seconds, it will turn again.

13) Self  resetting function  the system will cancel the people passing right when reading the card but not passing, the time can be setted.

14) RS485 Communication function

Applications:

Tripod Turnstile is an electro mechanical turnstiles. Its unique mechanical drive design allow the arm to be pushed effortlessly and auto-rotate back without any expensive electric motor

Tripod Turnstile can effectively control high volume human traffic ( up to 25 person per minutes ) while still maintaining a welcoming atmosphere. They can easily be integrated with any electronic system for ticketing, access control or time attendance.

Tripod Turnstile is suitable for both indoor and outdoor(Shed). They are optimized economical solution for railway, bus station, factory, colleges, commercial building, library, stadium, game park, hotel, super market, bank and etc.

Communication with customers

1 - Does the turnstile come with a RS485 PC software?

The turnstile itself doesn’t come with a RS485 PC software,you need purchase the RS485 door access control  and card reader.But we suggest you purchase TCP/IP door access control and card reader.Because it doesn’t  need converter,and use internet cable it can directly communicate with a computer.Compare with RS485 door access control,It is more convenient and transfer speed much faster.

2- Can I communicate the turnstile direct with a PC?

No,you can’t communicate the turnstile directly with a pc,because the main board just out put low level signal,but pc can not receive low level signal,so the turnstile must connect a door access control then can connect with a pc.

3 - They come with the complete command manual (if we want to develop our own software)?

For normal passage control,we have compete command manual for you.,Many clients from different countries use our software,don’t need second develop.If your company has the ability to develop your own software, we can provide SDK to you.

4- can I use just one access control control 2 pcs turnstile?

You can use one one access control for double doors to control 2pcs turnstile,but the 2 turnstiles must be very close,because if the distant is far,first,it will not convenient to set up the cable,second the single will be less then can influence the whole facility.So,for 2 doors,we suggest you use 2 access control.